Products PageProducts Page
BIOMETRIC FINGERPRINT & PROXIMITY CARD READER
Biometric Fingerprint Proximity Card Reader
This proximity access card reader is coupled with a biometric fingerprint sensor for extra security. Maximum distance is approx. 15cm (5.9 inches).
- Short response time
- Standalone or use with PC (software included)
- Large fingerprint capacity & high recognition rate
- Backup recognition mode for pool fingerprints, password or ID card
- Master card assignable
- Card capacity: 10,000 users
- One RS-485 port supported for networking
- Fingerprint database download/upload supported – up to 4500 fingerprint capacity
More Details
Designed for indoor installation
Built-in watchdog to prevent the system from halting
External reader port 26/34 bit Wiegand format for anti-pass-back.
Alarm function available (tamper, force entrance, door open too long)
Keypad locks for 30 seconds, while continuous error operation
Universal serial port supported for LED display, printer, lift controller, ETC
Lift control: 5,000/32 stops
Access mode: card only, card or PIN, card and PIN
Fingerprint access mode: card & fingerprint, card or PIN & fingerprint, card & PIN & fingerprint, 4 digit user number & fingerprint
Matching mode: High end optical sensor 500 dpi resolution @ 8 bit gray scale
Area of input: 18mm x 16mm
Panel display: English, French, Italian, Danish, Greek, Spanish
External reader port: suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
Networking: RS-485, 9600, N, 8, 1
Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. / latch type
Alarm relay: 12VDC @ 2A NO/NC/jumper selectable 0.0-600 sec.
Serial port: supported for ACC995, LED display, relay board, printer (4800, N, 8, 1)
Anti-pass-back: yes
Door group: 255
Time zone: 63
Event storage capacity: 11,000
Card reading range: 8-15cm (3.15"-5.91")
Power: 9-24VDC, <5W
Temperature: -20°C - 75°C (-4°F - 167°F)
Use with controllers like our ECL-ACC1000.
LONG RANGE PROXIMITY CARD READER
Long Range Proximity Card Reader
This long range proximity access card reader is made of sturdy ABS plastic and can read a card from a distance of up to 60cm (23.6 inches) in optimum conditions.
- Range: 33cm-60cm (12.99″ to 23.62″) with the right tag
- Suitable for WG 26/34, ABA II, ASYNC 9600, N, 8, 1
- Material: ABS
- Power: 9-18VDC, <4W
- Dimensions: 230mm x 230mm x 35mm (9.05″ x 9.06″ x 1.38″)
- Use with controllers like our ECL-ACC1000.
NETWORK READY 16 DOOR CONTROLLER INTERFACE
8 Indoor/8 Outdoor Door Controller Interface
This network ready access control panel has all the features you need in one package. Interface with up to 16 door control boxes and eliminate expansion boards and external network controller hardware.
- Compact design
- On-board network interface
- Built-in UPS function w/rechargeable battery support
- Supports 15,000 users
- Programmable card expiration supported
- 11,000 event memory
- 16 RS485 readers supported
-
Serial interface: RS485, 9600 baud, N, 8, 13
- 3 connections, 2 for readers, 1 for PC
More Details
Anti-pass back supported with ECL-ACC900/950/995
Auto diagnostic: No user intervention necessary
Dynamic door assignment supported
Emergency door release supported
2 Wiegand readers supported
Scheduled door release supported
Scheduled door arming supported
63 Time Zones
255 door groups
120 programmable holidays
Request to exit supported
Relay inputs: 4 (expandable to 16), 3A
Relay outputs: 4 (expandable to 16), 3A
Voltage: 9-24VDC variable auto detection
Power: 2.5 watts
Temperature/humidity: -10°C - 50°C (14°F - 122°F) @ 0-90% non-condensing
Dimensions: 180mm x 231mm x 62mm (7.09" x 9.09" x 2.44")
Optional I/O expansion board available for 8 more door in/door out devices (ECL-1010).
A great match with any of our proximity card readers, such as the ECL-ACC950, the ECL-ACC900, the ECL-ACC910, the ECL-ACC990LR, and the ECL-ACC995.
Power Supply for NETWORK READY 16 DOOR CONTROLLER INTERFACE
Power Supply for NETWORK READY 16 DOOR CONTROLLER INTERFACE
STAND-ALONE CONTROLLER & NETWORKING READER W/LCD
Proximity card reader for security door
This weatherproof proximity card reader is a perfect access control device for outside doors in factories, office buildings, and other sensitive areas. Maximum distance is approx. 18cm (7 inches). If you need to control access at a security door, this indoor/outdoor proximity card reader is a perfect choice for large applications.
- Big and clear LCD display, 4 lines text, 1024 x 64 pixel graphic
Unlimited site codes - 11 sets of time zones
- Different time zone for each user
Up to 120 holiday schedules
- Auto-show work status (set via time zone edit)
- Master cards range assignable
More Details
RS-485 support for networking (via controller or directly)
Built-in door sensing and arming inputs (on/off)
Auto open/close scheduling of doors
Control mode, card capacity and card type assignable by user directly
Built-in proximity reader and external Wiegand reader port
Auto-discriminating between stand-alone & networking system
Alarm function available (tamper, force entrance, door sense)
Networking: RS-485, 9600, N, 8, 1
External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
RF Frequency / Reading range 125 kHz / 10-18cm
Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. latch type
Alarm relay: 12VDC @ 2A NO/NC/(jumper) 0.0-600 sec. (COM Common)
DI input: Egress button / door sensor / card sensor
Transistor output: Arming / door sensor / card sensor
Tamper switch limit switch (form C)
Serial port: supported for AI-401R016, LED display, relay board, printer ETC. (4800, N, 8, 1)
Made of ABS plastic
Dimensions: 127mm x 91mm x 46mm (5" x 3.58" x 1.81")
Connects easily to our ECL-ACC1000.
Connect to PC using ECL-CN550.
Wireless Timer Relay
- Remote enabled wireless timer relay
- One normally open and one normally closed relay
- Wall mount control with removable module
- Personal Keyfob
- 12VDC power supply (not included)
- 600′ range
